The point of a water-soluble agrochemical pack is that nobody has to open it. The operator drops the sealed pack straight into the spray tank, the film dissolves, and the dose is released without the pouring, dusting or measuring that causes exposure.
A water-soluble agrochemical pack holds one measured dose of a crop protection product — wettable powder, water-dispersible granule or liquid formulation. The operator drops the whole sealed pack into the spray tank. The film dissolves in the tank water and releases the dose with no opening, no pouring and no measuring.
That protects the operator from the exposure that comes with handling concentrates, and it removes the over-dosing and under-dosing that manual measurement produces. It also means the pack itself leaves no waste to rinse, store or dispose of as contaminated packaging.
| Specification | What we supply |
|---|---|
| Film grade | Matched to the temperature of the tank water your operator uses |
| Pack format | Sealed bags and pouches, made to your dose weight and dimensions |
| Printed with product identification and hazard pictograms | |
| Film thickness | Set against dose weight and the mechanical handling the pack has to survive |
| Outer packing | Bulk cartons or retail-ready packs under your brand |
| Dissolving behaviour | Tuned so the pack dissolves fully in the tank, with no film residue in the spray line |
Agrochemical formulations vary widely in how aggressive they are to water-soluble film. Some wettable powders are perfectly compatible. Some solvents, high free-water content or extreme pH formulations are not, and no amount of film engineering fixes that.
The right approach is a compatibility trial: we select a candidate film, sample it against your actual formulation, and check that the pack still dissolves cleanly after the intended storage period. Where the formulation is genuinely unsuitable, we say so rather than supply a pack that fails in the field.
Send the formulation type, dose weight, tank conditions and hazard labelling requirement. We reply within one business day with a film recommendation and a compatibility sample plan. Bulk production starts only after the pack performs in your own tank trial.
For how film grades are matched to water temperature, read PVA film grades: cold, warm or hot water?. For the dosing and print considerations specific to this category, see Water-soluble packs for agrochemicals: dosing and print.
The questions buyers ask most about this application.
Wettable powders and water-dispersible granules are the most common fit, along with compatible liquid formulations. Strong solvents, high free-water content and extreme pH products are the difficult cases. Send us the formulation and we will confirm compatibility honestly.
Yes. Packs are printed with product identification and the hazard pictograms your market requires. Tell us the labelling requirement early, because it affects the printable area and therefore the film and pack dimensions.
Full dissolving is proven during sampling, in tank water at the temperature and hardness your operators actually use. Dissolving behaviour is tuned against dose weight, film thickness and tank conditions before bulk production.
It is matched to the temperature of the tank water, then confirmed by a compatibility trial against your actual formulation and the storage period the pack has to survive.
It depends on pack size, film grade and the printing required. Send your target quantity with your enquiry and we confirm the exact minimum, unit price and lead time in the written quote before you commit.
Send your product, the pack size you need and your target quantity. We reply within one business day with a film recommendation, a sample plan and a quote.
Chat on WhatsAppor send the form — we reply within one business day
Sainsun PVA